Course file documentation &raquo; Mario Making Mods

NightYoshi370 Owner Since: 05-17-17 From: Mushroom Kingdom	Credits to Tardanas. In this example you see two blocks. Every block has 32 bytes Placed blocks start at address `0x1B0` and end at address `0x145F0` Before that address is data about start and finish TODO Yellow are x and y coordinates of type `uint_16` The actual values can be calculated by `x = (readUInt16_BigEndian(OFFSET_OF_2) - 0x50) / 0xA0` and `y = (readUInt16_BigEndian(OFFSET_OF_8) - 0x50) / 0xA0` Grey might be some kind of z-Index I tried to change bytes directly but couldn't find any difference Green is x and y dimension of type `uint_8` Purple is the block's type of type `uint_16` Cyan is either `0x00` or `0xFF` if `0x00`: refers to any block with dimension 1,1 if `0xFF`: refers to any block that can change its dimension Black is always the same for every placed block Byte `0x17` sometimes has different values, but changing it had no effect Any other byte is zero Old 3DS XL info: I used to have a 3DSafe A9LH V11.3.0-36U with Luma in my CTRNAND. Since ReiNAND Reibooted and Re-Reileased, I "switch"ed back. Right now, I have boot9strap with Luma 8.0 as my CFW. Though, I'd like to see other CFW's for B9S.
	Posted on 07-23-17, 05:15 pm (rev. 1 by NightYoshi370 on 07-23-17, 05:21 pm) blarg